Ignition Source Coil 250 ohms Honda ATC 185 ATC 200 ATC 250 80-85 31120-961-004 31120-958-023

Ignition Source Coil 250 ohms Honda ATC 185 ATC 200 ATC 250 80-85 31120-961-004 31120-958-023

Artikelnummer: RM00042
Kategorie: Zündspulen
Hersteller: RM-Stator

73.11 €

inkl. 19% USt. , zzgl. (DHL standart Versand)

Unverbindliche Preisempfehlung des Herstellers: 87.00 €

(Sie sparen 15.97%, also 13.89 €)

Dieser Artikel muss bestellt werden. Bitte Lieferzeit beachten.

Beschreibung
Benachrichtigen, wenn verfügbar

Ignition Source Coil 250 ohms Honda ATC 185 ATC 200 ATC 250 80-85 31120-961-004 31120-958-023

Honda ATC 185 1980 1983
Honda ATC 200 1980 1983
Honda ATC 200 E - Big Red 1982 1983
Honda ATC 200 ES - Big Red 1984 1984
Honda ATC 200 M 1984 1985
Honda ATC 200 S 1984 1986
Honda ATC 200 X 1983 1985
Honda ATC 250 1981 1984

Dimensions:
Distance between fixation holes: 58 mm
Resistance : 250 ohms +- 20%

OEM Nummer
Honda 31120-961-004
Honda 31120-958-023

Read these instructions completely before beginning:
Step 1 :Take the ignition cover off. Are the remplacement parts similar? Compare the replacement part to the original. Theremplacement part should match, including the mounting hole locations, If not: Double check the application listing with your bike.
Step 2 :Take note of the wire colors of the original stator wires and disconnect them from the wiring loom.
Step 3: Remove the flywheel using a proper puller tool.
Step 4: Remove the baseplate with the original coil.
Step 5: Remove the screws that secure the coil and take the coil off.
Step 6: Cut the original wire close to the original coil. Take a good look at how the wire is connected to the coil. Connections: Connect the old wire up to the new coil. Use a soldering iron and resin core solder. (the type used in electrical applications
Step 7: Mount the coil onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!
Step 8: Refit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of the flywheel)
Step 9: Refit the flywheel. Tighten the bolt to specified torque.
Step 10: Fit the ignition cover.

TROUBLESHOOTING:
Engine will not start: Sometimes the source coil wires are reversed. Swap the connections, re-solder the wires and the engine should start.

If the engine still does not start, and before calling technical support, performs a few basic tests:

Re-check the connections.
Make sure you carefully solder the connections.
Twisting wires together or taping wires will cause engine inoperability.
Check the engine for spark.
Is fresh fuel in the gas tank?

Artikelgewicht:	0,80 kg

Kontaktdaten

E-Mail

Kunden kauften dazu folgende Artikel:

External Ignition Coil Honda 1986-2017 (ATC 110/125/200/250/350 FL 350R/400R TRX 125/200/250/300/350/400/450 CR XR )

36.09 € *

RM02004 CDI High Performance Box Honda ATC 110 84-85 ATC 200M 84-85 ATC 200S 84-85 ATC 200X 83-85

51.22 € *